Hitachi camshaft position sensor 350Z
What happens when the camshaft sensor goes bad?
When the camshaft position sensor goes bad, it can lead to several issues with your vehicle’s performance. Here are some common 350z camshaft position sensor symptoms:
- Check Engine Light: The check engine light will illuminate on your dashboard, signaling a problem.
- Difficulty Starting: The engine might crank but struggle to start, or it might not start at all.
- Engine Stalling: The engine could stall unexpectedly, especially at low speeds or while idling.
- Rough Idle: You may experience a rough idle, causing vibrations and instability.
- Poor Acceleration: There might be noticeable hesitation or lack of power when you try to accelerate.
- Engine Misfires: The engine could misfire, leading to rough running and loss of power.
- Reduced Fuel Efficiency: The engine might consume more fuel than usual, resulting in poor fuel economy.
- Increased Emissions: Poor combustion due to timing issues can lead to higher emissions.
These symptoms occur because the camshaft position sensor provides critical timing information to the engine control unit (ECU). When the sensor fails, the ECU can’t accurately control the fuel injection and ignition timing, leading to performance issues.
How many camshaft sensors does a 350Z have?
The 2009 Nissan 350Z typically has four camshaft position sensors. These sensors are located at different positions around the engine to accurately monitor the camshaft positions for optimal engine performance.
VQ35HR camshaft position sensor location: The camshaft position sensor on a Nissan VQ35HR engine is typically located near the top of the engine, on the side of the cylinder head. To access it, you may need to remove components such as the air intake parts or other obstructions.
How much to replace camshaft position sensor 350Z?
The cost to replace the camshaft position sensor on a Nissan 350Z can vary depending on factors like location, labor rates, and whether you’re using OEM or aftermarket parts. On average, you can expect to pay between $170 and $410 for the entire replacement, including parts and labor.
How to check if camshaft position sensor is bad on Nissan?
To check if the Hitachi camshaft position sensor on your Nissan is bad, you can follow these steps:
- Check for Error Codes: Use an OBD-II scanner to check for any error codes. A common code related to the camshaft position sensor is P0340.
- Visual Inspection: Inspect the sensor and its wiring for any visible damage, corrosion, or loose connections.
- Multimeter Test: Use a multimeter to test the sensor’s resistance. Compare the readings with the manufacturer’s specifications to determine if the sensor is functioning correctly.
- Voltage Test: Check the voltage output of the sensor while the engine is running. The voltage should fluctuate as the camshaft rotates.
- Check Timing: Ensure that the camshaft and crankshaft are properly synchronized. A misaligned timing can indicate a faulty sensor.
